Millefiori, Italian for “thousand flowers,” is a glassmaking technique in which slices of patterned glass rods are set into or fused onto a surface, here on beads. Venetian millefiori beads were made in huge numbers, and a string of them is a familiar find at estate sales and antiques shops. This guide covers the technique, the main stages of its history, the many places that made it and what can and cannot be told from a necklace labeled “Italy.” It draws on the Corning Museum of Glass, the Museo del Vetro in Murano and Wikipedia.
What millefiori means
Wikipedia says the English word comes from Apsley Pellatt’s book Curiosities of Glass Making, which was the first to use the term “millefiori” and which appeared in the Oxford English Dictionary in 1849. Before that the beads were called mosaic beads. The technique involves making canes, or murrine: rods of glass that carry a multicolored pattern visible only at the cut end. A rod is heated and pulled until thin while keeping its cross section, then cut into slices.
Early roots and the 19th-century revival
The technique is old. Wikipedia traces the making of mosaic beads to Roman, Phoenician and Alexandrian times and notes that canes probably made in Italy have been found at 8th-century sites in Ireland, millefiori beads were uncovered at Sandby borg on Öland, Sweden (apparently late 5th or early 6th century), and a piece of millefiori turned up at the early 7th-century Anglo-Saxon burial site at Sutton Hoo. The sources then differ on how it reached Venice. The Corning Museum says the Venetians took the technique from the Romans and “reinvented” it around the 14th century, though it was not used to a great extent until the 19th. The Museo del Vetro says murrino glass was known in Roman times and adopted by the Venetians in the 15th century. Wikipedia says the technical knowledge was lost by the 18th century and revived in the 19th.
What the sources agree on is the 19th-century revival. The Museo del Vetro says Murano glassmakers, in the most difficult period of their history in the first half of the 19th century, revived the ancient techniques to adapt to fashion. Vincenzo Moretti (1835–1901) produced the most important examples, and Giovanni Battista Franchini (1804–1873) invented thinner and more complex rods, including miniature portraits. Wikipedia adds that within several years of the revival, factories in Italy, France and England were making millefiori canes.
How Venetian beads were made
Corning describes the typical Venetian millefiori bead as having a matrix that was usually very dark blue or almost black, onto which many slices of complex canes were laid to make an all-over pattern. Venetian makers laid the slices so precisely that they almost eliminated the space between them, which greatly obscures the dark matrix. The museum says women made these beads, as they did most lamp-made beads, in a cottage industry in which a woman could produce up to two beads a minute. The beads were among the most popular for the African trade.
Dating a necklace
Corning dates its Venetian millefiori bead to 1845–1950. That span of about a century is wide, and these points help narrow it:
- “Made in Italy.” A tag or mark can place a necklace in a country, but it does not give an exact date. Because factories in France and England also made millefiori within years of the revival, a millefiori bead alone does not prove that it is Venetian.
- The pattern. Corning says Venetian designs ranged from true floriated patterns to cellular ones, in various shapes. Its own example uses two types of murrine that differ in color and form, producing a symmetrical pattern, and its floriated, star-shaped cross sections are what it considers a true millefiori design.
- The color. A dark blue or near-black matrix is the Venetian norm described by Corning. A blue necklace may use that ground or a different one.
- Condition. Check each bead for chips, cracks and lost slices, and check the stringing and clasp. Old stringing may need to be replaced by a professional.
Antique or later?
The Corning range runs from the mid-19th to the mid-20th century, so a millefiori necklace may be older or younger than a listing suggests. The technique is still in use, and Wikipedia notes that since the late 1980s it has also been applied to polymer clay, which is quite pliable and does not need to be heated and reheated, making it a much easier medium than glass. A bead of polymer clay is not glass, which is worth confirming before paying a price for glass.
Collecting notes
For a necklace of unusual length or quality, an opinion from a dealer who handles beads or Venetian glass is more dependable than a listing description. The Museo del Vetro in Murano and the Corning Museum of Glass both publish pages and object records that can be used for comparison.
Photo: “Millefiori beads, 1920s” by User:EvelynS (en.wiki), CC BY-SA 3.0, via Wikimedia Commons. Murano millefiori beads, not the original listing necklace.
Discover more from Antique Stuff
Subscribe to get the latest posts sent to your email.
