A ship’s compass has to work on a deck that pitches, rolls and is full of iron, and the history of the instrument is largely the history of solving those problems. This overview draws on Wikipedia’s compass article, its articles on the binnacle and the gimbal, two Royal Museums Greenwich records, a dry card compass of 1838 and a binnacle and compass patented in 1876, and the Compassipedia nautical compass history.

From lodestone to dry card
Wikipedia says the magnetic compass was invented in China as a divination device as early as the Han dynasty and was adopted for navigation by the Song dynasty in the eleventh century. Compasses used for navigation appeared in China by 1088, as described by Shen Kuo, and were made of iron needles magnetised by striking them with a lodestone. Dry compasses, which pivot the needle in a box instead of floating it, began to appear around 1300 in medieval Europe and the Islamic world.
Wikipedia says a mariner’s compass has magnets permanently attached to a card that moves freely on a pivot, with a lubber line marking the ship’s heading. Traditionally the card is divided into thirty-two points, known as rhumbs, although modern compasses are marked in degrees.
A dry card compass of 1838
The Royal Museums Greenwich entry for a dry card compass by W. & T. Gilbert shows the form in a documented example. It is an azimuth compass, meaning one used for taking bearings from a ship, so it has vertical sights on top and a card divided into degrees as well as points. The numbers are printed in reverse so that they can be read through the prismatic sight. A lever mechanism steadies the card when a bearing is taken.
The entry notes that the maker’s name is printed on the card, with the address 148 Leadenhall Street, London, and that a handwritten date of 19 April 1838 on the underside was probably when the instrument was examined by the Admiralty Compass Committee. A number is also inscribed on the gimbal ring.
Why gimbals matter
The RMG compass bowl is held on gimbals, which allow it to remain level. Wikipedia’s gimbal article explains that a gimbal is a pivoted support that lets an object rotate about an axis, and that on a ship, shipboard compasses typically use gimbals to stay upright despite pitching and rolling. The article says the device was described as early as the third century BC by Philo of Byzantium.
Liquid-damped compasses
A card in air swings widely when a ship rolls. Compassipedia says the idea of damping the card in liquid was first suggested by Ingen Housz in 1779, that Gabriel Wright of London made one in 1781 for Captain Burnaby, and that Francis Crow of Faversham took the first known patent in 1813. Wikipedia says the dry compass was supplanted in the early twentieth century by the liquid-filled magnetic compass.
Binnacles and deviation
A binnacle is a waist-high case or stand, generally in front of the helmsman, that holds the ship’s compass in gimbals and protects it. Wikipedia says that early binnacles of the mid-eighteenth century used iron nails, which were later found to cause magnetic deviation, and that iron-clad ships made the problem more severe. John Gray of Liverpool patented a binnacle in 1854 with adjustable correcting magnets, and Wikipedia credits Lord Kelvin with a system using two compensating spheres, colloquially called Kelvin’s balls in the UK.
At sea, Wikipedia explains, a ship’s compass must be corrected for deviation, the error caused by iron and steel in the ship. The ship is swung, meaning rotated while its heading is noted against fixed points ashore, and a deviation card is prepared so that the navigator can convert between compass and magnetic headings.
The Royal Museums Greenwich binnacle was patented in 1876 by Sir William Thomson, later Lord Kelvin. Its entry describes corrector magnets and iron spheres to counteract the ship’s iron, a light card with eight small needles, improved gimbals, a heeling error gauge in the pedestal and brass lamp holders for night use. Wikipedia dates Kelvin’s patent to the 1880s, so sources differ on the date.
Instrument makers
Makers’ and retailers’ names appear on cards and brass, and not every name belongs to a navigational firm. Wikipedia describes William Ford Stanley, for instance, as an English inventor who designed and made precision drawing and mathematical instruments, as well as surveying instruments and telescopes, through his company William Ford Stanley and Co.
What to look at on an old compass
- Card: the markings, whether points, degrees or both, and any printed maker’s name and address.
- Mount: a ship’s compass should sit in gimbals, and a gimbal ring can carry an inscribed number.
- Fluid or pivot: a liquid compass should show no bubbles or leaks, while a dry one should pivot freely.
- Corrector parts: binnacles may include magnets and spheres, and the original set is part of the object’s history.
Museum records are useful references for comparing form and construction. The brass compass in the photograph is titled “Early brass ship’s compass” on Wikimedia Commons.
Top image: “Early brass ship’s compass (30345958712)” by Thomas Quine, CC BY 2.0, via Wikimedia Commons.
Discover more from Antique Stuff
Subscribe to get the latest posts sent to your email.
