Antique Dishes — Staffordshire Transferware: How It Was Made, Patterns and What to Check

Transferware is earthenware decorated with a printed pattern rather than painting done entirely by hand. The method made detailed scenes affordable, and it became a staple of the Staffordshire potteries. This guide draws on Wikipedia’s article on transfer printing, its pages on the Staffordshire Potteries and creamware, and museum examples such as the transfer-printed plate in the photograph, recorded by the Victoria and Albert Museum.

How a transfer-printed plate was made

According to Wikipedia, an engraved copper plate was inked and the design was lifted onto tissue paper, then laid onto the unfired or biscuit-fired ware. The tissue was washed away, the ware was glazed, and it was fired again so the print fused under or in the glaze. The result can look almost like an engraving because that is, in effect, what it is: a print taken from a metal plate.

The technique was developed in England in the mid-eighteenth century and was taken up widely in Staffordshire. Wikipedia notes early commercial use in Liverpool as well, by printers such as John Sadler and Guy Green, and the method then spread through the potteries. It was far quicker than painting every plate by hand, which is why printed tableware reached a much larger market.

The same process was used on creamware and on later pearlware and white earthenware. The clay body, the glaze colour, and the printed colour are separate facts, and we need all three when we describe a plate.

Colours, patterns and names

Cobalt blue on a white ground is the colour most people picture, but printers also used brown, black, green, red and mulberry. “Flow blue” is a related look in which the colour was allowed to blur slightly in the kiln. Pattern names were often printed on the back — landscape, historical, botanical, or romantic scenes — but a name alone is not a maker’s mark, and popular patterns were copied by more than one factory.

Some of the best-known designs, including versions of the Willow pattern, were produced for decades and revived later. A plate can be old, later, or a mixture of an old shape with a later print. Comparing the quality of the engraving, the fit of the print around the rim, and the glaze is more useful than relying on a familiar pattern name.

Marks and what they can tell us

A factory mark, a pattern name, a retailer, or a registration diamond may appear on the back. Many perfectly genuine plates have little or nothing printed there, especially earlier ones. When a mark is present, we should treat it as one clue among others: the body, the glaze, and the style of the engraving have to agree with the claimed date.

Later reproductions and tourist wares exist. A very bright, glassy glaze, a print that sits crudely on the surface, or a mark that copies a famous factory without matching the rest of the plate are reasons to slow down. A museum piece is a better reference than a single online listing.

What to check before we buy

  • Body and glaze: creamware, pearlware or later white earthenware, with a glaze that belongs to that body.
  • Print quality: a fine engraved line or stipple, not a blurry modern transfer, and a print that follows the rim without obvious mismatch.
  • Condition: hairlines, chips, heavy utensil wear, staining, and staple or rivet repairs, all common on tableware that was actually used.
  • Restoration: overpaint on rims and well-disguised fills, which show up under a strong raking light.
  • Marks: a pattern name is not the same as a factory mark; record both sides with photographs.

Sets, later copies, and everyday wear

Transferware was made to be used, so a single plate from a dinner service is much more common than a complete set with the same pattern, border, and maker. Serving pieces — platters, soup tureens, ladles — may carry the same print in a different scale. We should not assume that every piece with a similar landscape belongs to one service; popular patterns were shared, slightly altered, and reissued. A mixed stack of “blue and white” is a collection, not automatically a set.

The Willow pattern is the example everyone recognises, and that is exactly why it is a poor proof of age or factory. Wikipedia and museum collections show many versions, made over a long period and in more than one country. Earlier prints tend to be sharper and more carefully placed; later tourist and reproduction wares can be heavier, crudely printed, or marked in a way that does not match the rest of the plate. When a rare-sounding historical title is printed on the back, it is still a pattern name until a factory mark or a documented shape confirms more.

In Britain, a lozenge-shaped design-registration mark, used in the mid-nineteenth century, or a later registered-number format, can sometimes be decoded to a year range with a standard chart. Those marks tell us when a design was registered, which is not always the year the particular plate was fired. Unmarked earlier wares are not inferior for lack of a stamp. Everyday condition issues include utensil wear in the well, rim chips, and staining along a hairline; none of those should be hidden with paint if we are describing the object honestly. Avoid the dishwasher, and avoid soaking a stained plate in anything harsh in the hope of making the print look new.

The plate in the photograph is a Staffordshire creamware example of about 1780 in the Victoria and Albert Museum, transfer-printed with a scene taken from Human Passions Delineated (1773). It is a museum object, not a plate offered for sale here.

Top image: “Plate depicting Mirth and Anguish, taken from Human Passions Delineated, 1773, Staffordshire, about 1780, creamware, transfer-printed – Victoria and Albert Museum – London, England – DSC04779” by Daderot, CC0 1.0, via Wikimedia Commons.


Discover more from Antique Stuff

Subscribe to get the latest posts sent to your email.