Creamware: Staffordshire and Leeds Pottery, Pierced Rims and Marks

Creamware is a pale, lead-glazed earthenware that reshaped English tableware in the second half of the eighteenth century, and plates with pierced, lace-like rims are among its best-known forms. This overview draws on Wikipedia’s article on creamware, its article on Leeds Pottery, a museum entry for a pierced-rim plate in the Historic Deerfield collection and the Maryland Archaeological Conservation Laboratory’s creamware guide, which was written for archaeologists identifying fragments.

A cream-colored earthenware plate seen from above, with a pierced openwork rim

How creamware developed

According to Wikipedia, creamware was developed in Staffordshire around 1750. It is a refined earthenware covered with a clear lead glaze, which gives it a warm, creamy tone. Wikipedia says that by about 1780 it had supplanted salt-glazed stoneware as the dominant tableware and that it stayed popular until the 1840s. Potters such as Thomas Whieldon and Josiah Wedgwood refined the body and the glaze. Wedgwood’s version, known as Queen’s ware after Queen Charlotte, became famous when he produced the Frog Service for Catherine the Great of Russia. Around 1779 Wedgwood lightened the cream colour to a bluish white by adding cobalt to the glaze, and sold the result as pearlware.

The Maryland guide credits Enoch Booth with introducing a cream-bodied refined earthenware in 1740 and describes Wedgwood’s clear-glazed Queen’s ware of 1762 as a landmark, although Wikipedia notes that Booth’s role is disputed. Maryland explains that creamware was thinly potted and fired twice, once to the biscuit stage and again after glazing. The Historic Deerfield entry makes a similar point about scale: more than 150 factories in England were making creamware, and most early pieces carry no mark.

Edge patterns on plates

Plates are among the most commonly found creamware objects, and their edges are a good guide to the variety. The Maryland guide lists four common rim patterns: Queen’s, royal, feather edge and shell edge. Because so many factories used them, a pattern alone seldom identifies the maker, and the same guide treats variations in rim moulding and decoration as tools for dating.

Leeds Pottery and the openwork rim

Leeds is the factory most often associated with pierced creamware. Wikipedia says Leeds Pottery was founded around 1756 at Hunslet, and that Leedsware became Wedgwood’s chief rival. The article notes that its decorative techniques included openwork produced by piercing or by basketwork. Piercing means cutting patterns through the soft clay of the rim before firing, which leaves a lace-like border.

The Historic Deerfield plate, dated 1780–1800, has a pierced rim of diamonds, ovals and circles. The entry also describes the broader context, noting that Wedgwood had developed his improved creamware by 1762. The plate in the photograph at the top of this post, in the Rijksmuseum in Amsterdam, is catalogued as Leeds creamware with an openwork rim and dated to about 1780–1800.

Marks and dating

Marks are helpful but not decisive. Wikipedia reports that Leeds Pottery used an impressed “Leeds Pottery” mark from about 1775, and that “Hartley Greens & Co” was added from 1800. Earlier wares were unmarked. The article also warns that eighteenth-century marks were copied on later reproductions, and that the factory itself had a long life. It closed in 1881, was restarted in 1888 and wound down in 1957.

That history means a Leeds-style mark can belong to an eighteenth-century plate or to a much later one. The Historic Deerfield entry makes a related point, noting that most early creamware is unmarked, so style, body and glaze remain important. Comparing a piece with documented museum examples is a safer route than relying on an impressed name alone.

Body and glaze

  • Colour: the Maryland guide says creamware ranges from ivory to tan to straw-coloured. Pearlware, by contrast, has a blue-tinged glaze produced with cobalt and a slightly greyish body.
  • Thickness: early creamware is described as thinly potted, so heavy, thick plates may belong to other wares or later periods.
  • Firing: a biscuit firing followed by a glaze firing produces the smooth, glassy surface; crazing, a fine network of cracks, can appear in old glazes.
  • Rims: check pierced rims closely for old losses, restoration and filled holes.
  • Marks: an impressed name is a clue to be checked against known dates rather than proof.

Why creamware mattered

Creamware was light, durable and relatively inexpensive, and it could be moulded, painted, printed or pierced. Wikipedia says it is made from white clays from Dorset and Devon with calcined flint, fired at a lower temperature than salt-glazed stoneware and glazed with lead. The earliest method, dusting lead powder on the ware, caused lead poisoning, and dry grinding of flint caused a lung disease called potter’s rot. Creamware spread across Europe and to the United States, and by the 1780s Wedgwood was exporting as much as 80% of his output to Europe.

Archaeologists use creamware to date sites, and the same details help collectors: a pierced-rim plate with a documented form, a soft cream glaze and a plausible mark can be compared with examples in museum collections.

Top image: “Bord van hardgebakken aardewerk, Leeds creamware met opengewerkte rand., BK-NM-14236” by Rijksmuseum, CC0 1.0, via Wikimedia Commons.


Discover more from Antique Stuff

Subscribe to get the latest posts sent to your email.