Antique Skeleton Keys: What the Name Means, Warded Locks and Collecting

Antique keys with large bows and hollow or notched bits are often called skeleton keys, but the term has a narrower meaning than most listings give it. Understanding the warded lock that such keys were made for explains both the name and the keys’ shapes. This guide draws on Wikipedia’s entries on the skeleton key and the warded lock, and on a record from the Walters Art Museum.

Four old iron skeleton keys with ring-shaped bows lying on a blue-gray background

What a skeleton key is

Wikipedia defines a skeleton key as a type of master key in which the serrated edge has been removed so that it can open numerous locks, most commonly warded locks. The term comes from the fact that the key has been reduced to its essential parts. In practice, a key is made into a skeleton key by filing or cutting away most of the center of its bit so that it passes by the wards in the lock without interference. A true skeleton key is therefore one that has been altered to open many locks. Popular usage is looser, and old-style keys of many kinds are often called skeleton keys, so the distinction is worth keeping in mind when reading listings.

How a warded lock works

In a basic warded lock, a set of obstructions called wards, often concentric plates, blocks any key that is not designed for the lock. The key’s bit has notches or slots that line up with the wards, which lets it turn. On single-sided locks a cylindrical post usually sits in the center of the lock, and the key has a hole in its tip that fits over the post. The post gives a point of leverage and helps align the key with the wards. When the correct key is inserted it clears the wards, rotates around the post and then pushes a latch or sliding bolt. On double-sided locks, which can be opened from either side of a door, the center of the key’s shaft is solid and extends past the bit into a hole on the opposite side of the lock.

These details explain why many antique keys look so different from one another. The hollow barrel and the cut-out bit are not decoration; they correspond to the post and wards inside the lock.

A long history and a security weakness

Wikipedia calls the warded lock one of the oldest lock designs, found as far back as ancient China and Rome. Warded locks were used prolifically in monasteries in the Middle Ages. The Walters Art Museum holds a German “box of wards” lock and key of about the 1660s, made of steel, an example of how long the principle has been in use.

The design has a built-in limit. Wikipedia explains that a well-designed skeleton key can bypass the wards, which is why warded locks are generally used for low-security applications. The number of unique keys that can be made is also limited, so many keys will open doors they were not designed for. The later lever tumbler lock solved this problem, since each lever has to be lifted to a certain height to operate the lock. Wikipedia adds that warded locks are still used in the United Kingdom and Ireland for low-security purposes and on heritage sites such as ancient monuments and churches, where the primary security is provided by other means, such as a lever lock.

Where skeleton keys are still used

Wikipedia notes that legitimate skeleton or master keys serve many modern purposes where the original key has been lost or is unavailable, and that in hotels without electronic locks housekeeping staff have used them to enter rooms. It also says the keys have often been associated with attempts to defeat locks, and that standard keys have been filed down for that purpose.

What to look at when collecting

  • The bit. Look at the notches and cut-outs. A bit with most of its center cut away may be a true skeleton key; a bit with matched slots and notches is a regular warded key.
  • The shank. A hollow barrel fits over a post. A solid shaft that extends beyond the bit suggests a key for a double-sided lock.
  • The bow. The handle shape is the most decorative part and is useful for grouping keys by style, but similar bows were used over a long period.
  • The metal. Iron, steel and brass keys age differently, and heavy rust can hide cracks or weakness in the shank and bit. A very rusted key should be handled with care.
  • The match. A key that fits an old lock is more useful than one that does not, but fit alone does not prove that a key is original to the lock, since many keys fit locks they were not made for.

A key’s form is a limited guide to its age, so a maker’s mark or documented provenance, where one exists, is more informative than appearance alone.

Care

Heavily rusted iron and steel can be fragile, so gentle handling is sensible, and aggressive cleaning can remove surface evidence of age. For a key that may have historical or monetary value, a museum or a professional conservator is the best source of advice.

Top image: “Four Skeleton Keys on a blue background (51865175725)” by Cindy Shebley, CC BY 2.0, via Wikimedia Commons.


Discover more from Antique Stuff

Subscribe to get the latest posts sent to your email.

One comment

Comments are closed.