A mechanical antique clock is a delicate machine, and the person who services it matters as much as the clock. A general jewelry or electronics repair shop may not have the training, parts or patience for a century-old movement. This guide lists what conservation bodies recommend, and what to ask before you hand over a clock.
Who should work on it
The Canadian Conservation Institute recommends that old clocks be evaluated by a clockmaker acquainted with historic objects, and says a full mechanical assessment should come before any repair aimed at making an old clock run. Icon’s Icon’s clock care guide notes that accredited horological conservators have qualifications in both horology and conservation, and that they follow a principle of minimum intervention when repairs are needed.
In the United States, a practical starting point is the NAWCC local chapters, since the National Association of Watch and Clock Collectors lists local chapters whose members may be able to suggest experienced repairers. Referrals are a starting point, not a guarantee, so still ask the questions below.
Questions to ask a repairer
- What experience do you have with this type of clock, such as a mantel, wall, carriage or longcase clock?
- Will you examine the movement and give a written estimate before starting work?
- Will you aim to repair worn parts or replace them? Replacing parts can affect originality and value.
- What lubricants and methods do you use, and is the work guaranteed?
- Will the old parts be returned to me?
Signs a clock needs attention
Icon says that if a clock, for no obvious reason, begins to keep erratic time or fails to run or strike for its full duration, it usually needs attention. Seek professional advice rather than adjusting it yourself.
Servicing intervals
Icon states that lubricants deteriorate over time, and recommends that a clock be examined and re-lubricated about every three years. It suggests the whole movement be dismantled and cleaned after five years, and no later than eight, to avoid wear and expensive repairs. These are general guidelines from one conservation body, so ask your clockmaker what suits your clock.
Why home repairs are risky
Both the CCI and Icon caution against do-it-yourself disassembly and lubrication unless you have the experience and tools. The CCI warns that some proprietary clock-cleaning solutions contain acids that can damage parts, and that too much oil, or the wrong type, attracts dust and creates a sticky residue. Icon advises against proprietary lubricant products. Wooden movements are especially fragile.
Everyday care between services
- Wind gently and steadily with a well-fitting key. Icon suggests counting the turns a full wind takes and using that number as a guide.
- On a striking clock, do not turn the hands backwards without advice. Icon says to stop the clock and wait for the time to catch up instead, and to set the time with the minute hand only.
- Keep the clock away from heat sources and strong sunlight, which can damage cases and movements.
- Secure longcase and wall clocks to the wall.
- Do not leave a clock stopped for more than a month; if that happens, have it examined and re-lubricated before restarting.
Cost and value
Repair costs depend on the type of clock, its condition and the parts needed, so quotes vary. For a clock with possible historic or monetary value, consider an appraisal before any extensive restoration, since replacing parts or changing finishes can affect value.
Photo: “Seth Thomas Clock Company mantle clock 1880.jpg” by Mark James Miller, CC BY-SA 3.0, via Wikimedia Commons. An 1880 Seth Thomas mantel clock (model 295); it is not a clock offered for sale here, and the photograph is not an endorsement of any repair shop.
Discover more from Antique Stuff
Subscribe to get the latest posts sent to your email.
