Whale Oil Lamps: How Early American Glass Lamps Worked and What to Check

A whale oil lamp is an oil lamp built to burn whale oil through one or more wick tubes in a metal burner. They were common in American homes in the first half of the 19th century and were made in glass, pewter, tin and brass. Because many have been altered over the years, a little background helps when judging one. This guide draws on a 1942 article reprinted by Collectors Weekly, on records at the Corning Museum of Glass and on the Canadian Encyclopedia.

A clear glass whale-oil lamp with a stepped square base and a dark metal collar at the top

Lighting before the whale oil lamp

For thousands of years the lamp of the average person was a shallow dish of oil or grease with a floating wick, which, in Collectors Weekly’s words, “produced a little light and a lot of carbon.” The first big change came in the 18th century, when the Swiss chemist Aimé Argand invented a lamp with a burner that admitted air to the flame and found that a glass chimney gave a clearer, steadier light. The Canadian Encyclopedia calls his center-draft burner, with a tubular wick and glass chimney, the beginning of modern lighting.

What a whale oil lamp is

The Collectors Weekly article says the whale oil lamp, equipped with one to three metal tubes for holding circular wicks, could be found in the average household as early as 1825. The Canadian Encyclopedia adds that simple whale-oil burners usually had one or two vertical wick tubes extending into the fuel container, called the font. Whale oil was also used in more complicated designs, such as the Astral or Simumbra lamps, whose ring-shaped reservoirs let light fall downward without obstruction. From 1830 to 1860, the same source says, the most common fuels in North America were animal fats, burning fluid made from camphene and redistilled alcohol, so whale oil was one fuel among several.

Blown and pressed glass

In glass, the earliest lamps were blown, usually with a goblet base. Collectors Weekly notes that the oil reservoir on many of them looks like an early electric light bulb in shape and in the thinness of the glass. Pressed-glass versions were also made at Sandwich, Massachusetts, and other glasshouses from about 1830, in yellow, blue, amethyst and opal as well as clear glass.

Museum records show how varied the construction could be. A lamp in the Corning Museum of Glass made by Bakewell, Page & Bakewells in Pittsburgh between 1835 and 1845 has a blown spherical font attached by a wafer to a blown stem, which is attached by more wafers to a square pressed foot. Another Corning lamp, dated 1840 to 1850, is pressed opalescent white glass with an octagonal font and a metal-and-cork burner joined by a wafer to a hollow hexagonal standard and base. A lamp made in separate parts and joined at the wafer is therefore normal; it is not a sign of a later repair.

Pewter and other metals

Pewter lamps belong to the whale oil period, according to Collectors Weekly, because the alloy had gone out of favor by the time kerosene lamps arrived. Many followed the general design of candlesticks, except those made to be carried or hung on a wall, which had a bowl-shaped reservoir and a bail. The same article says that pewterers were not careful about marking these lamps, so examples with a maker’s touch mark are rare. A pewter lamp without a mark is not suspicious for that reason alone.

From whale oil to kerosene

Kerosene was discovered in Pennsylvania in 1859, and by the 1860s the kerosene lamp with a flat wick and patent burner had been perfected. Collectors Weekly points out that many whale oil lamps were refitted at that time: just as such lamps are adapted for electricity today, “back in the 1860s many thrifty households had them fitted with the proper burners for kerosene.” The article’s example, a pair of cobalt blue Sandwich lamps, has lost its original burners, which it calls not unusual.

What to check

  • The burner. Original burners with vertical wick tubes are often missing. A replacement or a kerosene-type burner changes the lamp’s originality, though not its form.
  • The joins. Look at the wafer joins between font, stem and foot for cracks, chips and old repairs. Joins deserve a close look on any assembled lamp.
  • The glass. A thin blown font can have damage that is hard to see. Hold the lamp to the light and check the rim, the base and the shoulder.
  • Conversions. Many lamps have been converted to electricity. Any wiring should be inspected by a qualified person.
  • Marks. Maker’s marks are uncommon on both pewter and glass, so a lamp is better judged by its form, construction and color.

Use and safety

Antique lamps are best treated as display pieces. Filling an antique font with fuel creates a fire risk that was recognized in the period itself: the Canadian Encyclopedia says burning fluid was highly volatile and caused numerous fatal explosions. A lamp that was once safe for whale oil may not be safe for other fuels.

Top image: “Whale-oil lamp MET DP207757” by Thomas H. Cains / Phoenix Glass Works, CC0 1.0, via Wikimedia Commons.


Discover more from Antique Stuff

Subscribe to get the latest posts sent to your email.