A bow-back Windsor is a chair whose back is formed by a bent wooden hoop, with slender spindles running from the seat up to the bow. This overview draws on Wikipedia’s Windsor chair article and on catalogue entries for two bow-back armchairs, one at George Washington’s Mount Vernon and one at Colonial Williamsburg.

What makes a chair a Windsor
A Windsor chair is defined by how it is put together rather than by where it was made. The back and legs are round-tenoned, meaning pushed into drilled holes, in a solid wooden seat that is often carved into a shallow dish, or “saddle,” for comfort. Other chair styles have back legs and uprights that run continuously from floor to top. In a Windsor the legs, stretchers and spindles were traditionally turned on a pole lathe, and the spindles could also be shaped with drawknives and spokeshaves.
The back, and sometimes the arm pieces, are formed from steam-bent wood. Wikipedia lists the main Windsor forms as sack-back, hoop-back, comb-back, continuous-arm, low-back, rod-back and fan-back. The bent-hoop form belongs to the family that museum catalogues call bow-back.
Origins and the road to America
The name and the early history are less certain than the construction. Wikipedia notes an early reference to a “Windsor seat” in Stephen Switzer’s Ichnographia Rustica of 1718, and it names High Wycombe as a centre of production. It also records that the first bowed chairs were shipped to London from Windsor in 1724.
Windsor chairs reached the American colonies soon afterwards. According to Wikipedia, Patrick Gordon imported them from England in 1726, and the first American-made Windsor was probably built in Philadelphia around 1730.
Two documented American examples
The Mount Vernon armchair was made by Gilbert and Robert Gaw between 1793 and 1798 and is stamped “G & R GAW.” It is finished in dark green, but the catalogue entry reports evidence of earlier green, white and yellow finishes. That layering is typical of surviving Windsors: a chair used for generations was often repainted, and older layers can survive only in protected places.
The Colonial Williamsburg armchair is dated 1790–1800 and attributed to Rhode Island. Its entry lists maple, white pine and ash, and counts seven spindles. Traces of an original green remain, later coats of red and blue followed, and black is the uppermost layer. Together the two entries show that a painted bow-back often has a history of several finishes.
Wood choices
Using several woods in one chair is a hallmark of the form. Wikipedia reports that American Windsors of the eighteenth century commonly contain three species. Pine, basswood or tulip poplar is common for the seat. Maple, a stiff wood that turns crisply, was used for the undercarriage. Oak, ash and hickory split and steam-bend well and are straight-grained and flexible, so they suit the slender spindles. English Windsors typically have elm seats, which are usually thinner and less deeply saddled than American ones.
The Colonial Williamsburg entry fits this pattern, with white pine for the seat, maple for the turnings and ash for the bent parts. The thick seat is important because it anchors the tapered leg sockets and gives the undercarriage its strength.
Painted finishes
Because a Windsor mixes woods, paint was the usual way to unify the chair; Wikipedia says traditional Windsors are typically painted, primarily to hide the different types of wood. It adds that early British Windsors used as garden seats were often painted green to waterproof them, while American chairs of the eighteenth century were grain-painted in a light colour, overpainted with a dark one and coated with linseed oil to protect the fragile paint.
In the nineteenth century, Wikipedia says, factories produced vast numbers of chairs, and an experienced painter could finish one in under five minutes. By mid-century the usual finish was a solid colour with simple stencilling. Wear on a painted surface follows a recognisable pattern, with paint wearing off around the edges and revealing the colours underneath. The original finish often survives best in unworn areas such as the bottom of the seat or around the turnings, and later repainting, even well-intentioned restoration, diminishes the value of an original finish.
Points to check on a bow-back
- Seat: look for a hand-shaped saddle and tool marks, and for splits near the leg sockets.
- Bow and spindles: the bow should seat securely in the arms and seat, and the spindles should look individually fitted.
- Legs and stretchers: loose or replaced stretchers are a common repair and are worth examining closely.
- Woods: a mix of species is expected, so different woods under the paint are normal.
- Paint: several layers, worn in the right places, are more convincing than one uniform coat.
- Marks: a stamp, as on the Gaw chair, can anchor a maker, but many Windsors are unmarked.
Because the form was made in large numbers across centuries and countries, it alone says little about age or origin. Wood, tool marks, joinery and paint history carry the evidence, and catalogue entries such as the two cited above are a good place to compare details.
Top image: “Windsor Georgian Double Bow with cabriole legs” by Amanda Slater, CC BY-SA 2.0, via Wikimedia Commons.
Discover more from Antique Stuff
Subscribe to get the latest posts sent to your email.
